T-Cut Bumper & Trim Treatment

T-Cut Permanent Bumper & Trim Treatment is the number one permanent solution for sun-faded bumpers and trim. It’s an easy to use permanent pigment – not just cosmetic dressing.  It permanently colours plastic, rubber, vinyl back to its original finish.  Unlike silicone dressing that simply restores the colour temporarily, T-Cut will not wash off and completely covers the worst UV faded trims.  Permanently restores bumpers and trim in 2 easy steps! Dries in 5 to 20 minutes. No buffing required.


Suitable for use on: Bumpers, Wheel Wells, Mouldings & Door Handles

Available in Black and Grey colour option.

Kit Contains; Degreaser 125ml, Dressing 200ml & Cloth.

Directions for use:

1.Degrease the bumper or trim using the cloth provided

2.Apply the lotion

Watch this incredible product at work!


Posted in Uncategorized | Leave a comment

Want to restore your car’s paintwork?


It’s one thing to keep your car clean with regular washes and waxes.  The fact is, over time, no matter how frequently you wash your car, build up from dirt, road debris, environmental pollutants, bugs and tar will sink deep into your car’s paintwork and no regular wash and wax will remove it.

The result is dull and lacklustre paintwork.  The inevitable chips, scratches and rust spots will also detract from the look of your car.  If you leave these surface contaminants, scratches and rust spots you risk permanently damaging the paintwork.

Now there is a product range in Australia dedicated to restoring your car to its original glory – T-Cut.  T-Cut is a whole new range of car care products for the car enthusiast who wants their car to maintain its showroom finish all year round. 

Is it time to restore your car’s paintwork? Is it time for T-Cut?

Maybe you  want your car to look like it did when it was brand new!

Maybe you are selling your car and you want to get the best possible price!

Whatever your restoration problem is, T-Cut has the answer!


Ingrained road grime, tar spots, dried insects and oxidation will all damage your car’s paintwork and detract from its look.  Exposure to sun, pollution and the environment will all make your car’s paintwork appear dull and lacklustre over time.

While regular washing and waxing is critical to keep your car looking good, there comes a time where you need to really show your car some serious TLC and get rid of the built up muck, pollution and grime.  It actually is possible to return your car’s paintwork to ‘like new’ and it doesn’t have to cost a fortune!

With just a few simple products from T-Cut you can bring back the original shine to your car’s paintwork as well as increase its value and visual-appeal.

  • We are going to show you how to remove all the built up dirt, oxidisation and debris from your car’s paintwork.
  • We are going to show you which products to use to restore the colour and mirror like finish to your car’s paintwork.
  • We are going to show you how to repair scratches and fix rust spots. 

T-Cut is the number 1 selling line in most automotive outlets in the UK and Europe.  It has remained the world’s most respected Car Care brand for 60 years. Continually asked for by name, T-Cut delivers top quality, with a wide range of performance products for renovation and restoration of car paintwork.

From the T-Cut Original formula to the new innovative T-Cut 365 Kits, T-Cut is available in many variants depending on the kind of paintwork, colour, condition, age and the extent of damage.  Whatever the problem, T-Cut has the product to restore and renovate your car like new!

T-Cut is available from the ALTREX website or ask for it by name in Autobarn or AutoPro stores


The T-Cut product range has been developed over the years with new products consistently being introduced to compliment modern vehicle paintwork and technological advancements.

The T-Cut Range includes:

T-Cut Original & Metallic

T-Cut Colour Fast

T-Cut Scratch Remover

T-Cut 365 Kits

T-Cut Headlight Restoration Kits

T-Cut Repair and Protect Kits

T-Cut Complete Clay Bar Kits

T-Cut Metal Polish

T-Cut Scratch Magic

T-Cut Rust Magic

T-Cut Power Shampoo

T-Cut Detailer

T-Cut Wax


Posted in Uncategorized | 1 Comment

Where do we start?

Your first step seems obvious but it’s crucial you start with a good, clean surface to work on.  T-Cut Power Shampoo is a great product to use and comes highly recommended.  With a warehouse full of car care products to choose from, THIS is the product our Managing Director cleans his own car with each week!

Next we need to make an inventory of the problems we want to address.

If the paintwork needs serious restoration we recommend using the T-Cut Classic Clay Bar  to begin with.  Clay bars are similar to Play Dough.  For beginners, we suggest not going more aggressive than the T-Cut Clay Bar as “aggressive” professional clay can potentially mar paint, introducing a new problem. The difference between grades is essentially that the more aggressive clay will remove contamination faster, but at the risk of slightly marring the paint, whereas softer T-Cut grade clay is very safe and with proper technique will not mar the paint.

Once you’ve completed claying the car, it’s time to start think about restoring the car further with a T365 Paintwork Perfection Kit.  Pick the kit suited to the colour of your car and away you go!

Minor scratches and rust spots can be repaired with T-Cut Scratch Magic and T-Cut Rust Magic.  You’ll be delighted to see the fast and effective results from these two products.

Finally, if you are concerned about yellowing or slightly scratched headlights, the T-Cut Headlight Restoration Kit is just the ticket!  So simple, so effective, this product literally takes just a few moments to produce the most incredibly satisfying results. Simply mask around the light, apply the compound, buff with the microfibre cloth supplied till clear and shiny then apply the sealant.

This is just one approach to the restoration of your car’s paintwork. Once you have started to use T-Cut products you’ll soon discover that the initial elbow grease you used to bring your car back to ‘like new’ pays off as each wash becomes easier and easier.

We love our T-Cut products and we know you will too!



Posted in Uncategorized | Leave a comment

T-Cut Wax


T-Cut Wax restores and protects car paintwork with premium wax. Ideal for use on new paintwork, including metallic and pearl surfaces which already have minor scratches and some swirl marks.

Also available in Trigger!

  • Removes scratches and blemishes
  • Easy application
  • Spray on, wipe off
  • Fast Action Trigger
  • Especially for new car paintwork
  • Gently cleans away scratches leaving a brilliant shine


Posted in Uncategorized | Leave a comment

T-Cut Detailer


Transforms your paintwork to a deep, rich glossy finish.

Shines like a wax but takes a fraction of the time

A mild cleanser and hard surface treatment

T-Cut Detailer shines like a wax but takes a fraction of the time to apply. T-Cut Detailer is a mild cleanser and hard surface treatment that is suitable for everyday use to remove dust, dirt and fingerprints in between regular washing. No polishing, buffing or hard rubbing required.


Posted in Uncategorized, Wax | Leave a comment

T-Cut Power Shampoo


This is the first step in bringing back that original lustre and shine to your car’s paintwork!  T-Cut Power Wash is a concentrated car shampoo and is the innovative first step to flawless paintwork. The powerful acting formula contains advanced detergents which removes surface contaminants, all traces of traffic film, dirt, grease and grime providing a high gloss, streak-free finish leaving your paintwork sparkling and restoration ready.

  • T-Cut Power Wash 500ml
  • Heavy Duty Car Shampoo
  • Concentrated Formula
  • Streak Free Finish every time
  • High foam formula
  • Removes traffic film, dirt and grime
  • Spotless streak free, shiny surface every time
  • Leaves the surface fully prepared for further treatment with T-Cut restorative products


Posted in Uncategorized | 1 Comment

T-Cut Rust Magic


T-Cut Rust Magic Pen is the smart way to convert rusty metal to a prepared surface.

Designed for the more intricate jobs where an accurate application is needed.

After 3 hours a clean, well-prepared surface remains, suitable for over-coating

Convert rusty metal to a clean surface in just 15 minutes

Leaves a blue/black surface ready for over-coating

Cures rust and prevents further corrosion

Fine tip for accurate repair and no mess!


Posted in Rust, Uncategorized | Tagged | 1 Comment